XL-H08

General Characteristics :

Nickel and Cobalt based electrode used for overlaying and protection of components operating at high temperatures. The strength of the weld material at 800°C is approx. 10 times that of mild steel. Suitable for metal to metal wear excellent resistance to thermal shock corrosion & acids. Deposit will work harden to approx 400 HB. Used where subsequent machining must be done without heat treatment.

Applications :

Repair for piercing mandrels, air rammer tip piercing punches hot trimming dies un setter dies, hot working tools, hot shear blades, extrusion dies, rolling mill guide, ingot tongue ends, rolling mills rolls, lime kiln burner parts, press tools punches bleeder valve seats forging die blocks nail head die, cylinder draw rings, straightening and shear of die bearings and journals, sizing punch, wire drawings capstans, etc.

Advantages :

• For overlaying and protection of components operating at high temperatures.
• The strength of weld metal at 8000C is approx 10 times of mild steel.
• To avoid cracking on job.
• No oxidation at red heat and less distortion in mech. properties at elevated temps.
• Unaffected by most common corrosive chemicals.
• Excellent resistant to metal to metal wear.
• Used mainly where subsequent machining must be done without heating treatment.
• Can be used for wide range of application particularly valves.