ISO 9001:2015 Certified
24 X 7
+91 99740 92362
Get A Quote

Welding and Cutting Equipment

IGBT Based Inverter Controlled MMAW / TIG Welding Equipment

Salient Features :
  • Light weight & compact.
  • Designed to work under wide voltage fluctuations and protected against over voltage, under voltage, single phasing, overheating with indications.
  • On load power consumption 50% lesser than conventional machines.
  • High OCV & controlled start current ensures reliable electrode Ignition.
  • In-built selectable pulsing of 1 to 10 Hz of output current.
  • Reliable start even at 3 amps in Tig without any surge in welding current makes it suitable for thin sheet welding.
  • Fast regulation speed & excellent dynamic properties ensure spatter free welding performance even with difficult electrodes.
  • Stepless regulation.
Applications :
  • Brewery plants
  • Chemical plant equipment
  • Food processing machinery
  • Pharmaceutical machinery
  • Dairy equipment
  • Structural welding
  • Pipeline welding

IGBT Based Inverter Controlled MIG / MAG Welding Equipment

Salient Features :
  • High power factor & Efficiency.
  • Advanced Soft Switching inverter technology, low spatter.
  • Continuous adjustment of welding voltage and current.
  • Reduced melting ball at the end of welding.
  • High operating frequency hence small size and weight.
  • Digital Display of Welding voltage and current.
  • Servo-controlled wire feeder ensures constant & uniform feeding of wire.
  • All position welding, high deposition rate with Metals such as mild steel, stainless steel, carbon steel, aluminium and their alloys with proper gases and accessories.
  • 2T/4T functions with crator current control.
  • Protection of power source against under voltage, over voltage, single phasing, thermal overheating, Short circuiting of output terminals etc. with indicators.
  • Stepless regulation.
Scope of Supply :
  • Power Source
  • Wire Feeder
  • Mig Torch
  • Co2 Regulator with Flow Meter
  • Gas Pre Heater
  • Earthing Cable
  • Inter Connecting Cable 5 Mtr, Power Source to Feeder
  • Gas Hose Pipe
Wire Feeder :
  • Motor : Servo
  • Voltage : 24v DC
  • Current : 5Amps
  • Feeding Speed M/Min : 2.5 to 16
  • Wire coil Max Weight : 25 Kg.
  • Dimensions (mm) : 480 x 205 x 300
  • Weight : 9.5 Kg.